ES-2500 2500w portable power station
Video Description
Product Description
The ES-2500 backup power supply is one of the outdoor portable power supply products of our company,Using aluminum alloy shell material, light and portable, the appearance is fashionable and generous, the core uses a power type of LiFePo4 batteries (33140), using dual-phase inverter fast charging technology, without external adapter. Provide two different voltage modes: AC output and DC output to meet the power demand of users. This product can be used as UPS power and as outdoor emergency backup power.
This product has built-in large capacity LiFePo4 batteries, total capacity 2304WH,720000mAh. Providing a steady stream of power for the load. It is also widely used as a backup emergency power supply for indoors and outdoors.
Dual-phase inverter AC charging, 220V (110V) AC output, one 12V DC output, four USB3.0 outputs, two TYPE-C outputs,solar charging, with LED lighting lights, with color screen display.Suitable for a variety of different equipment, such as drones, portable ventilators, medical devices, mobile phones, tablets, laptops, desktop computers, small printers, various lamps, small fish tanks, photographic equipment, electric scooters, etc. Great convenience for users to travel at home, outdoor work, camping picnics, mountaineering expeditions, etc.
Dual-phase inverter technology, using the output power tracking technology, independently calculate the output power, can bring the perceptual and capacitive load exceeding the rated power, without causing output interruption.
Popularization of Small Knowledge
When using energy storage products, you should understand what is and what is WH , and the difference between them, so as to safely buy the products that meet your needs. The analysis is as follows.
1. W represents watts in the energy storage power supply, that is, the size of the output power. For example, the output power of 500W means that it can drive devices of less than 500W, and the output power of 1000W means that it can drive devices of less than 1000W.
2. Before using the equipment, we must know the power (W) of the equipment before using it, otherwise it may cause energy storage power protection and cannot be used. At this time, after the equipment is disconnected, the energy storage power supply can be used. If it cannot be started, it can be restored after charging!
3. "WH" represents "watt-hour" in the energy storage power supply, that is, the capacity size of storage. For example, for energy storage products with a capacity of 600 WH,the equipment you use is 50W which can use time is about 12 hrs(600 WH / 50 W =12 hrs). For example, for energy storage products with a capacity of 1200 WH, your equipment is 1000W which can use time is about 1.2hrs (1200WH/1000W=1.2hrs). That is to say, the power of the equipment is low the discharge time is relatively long. On the contrary, the discharge time is relatively short when the equipment power is large.
Description of Panel Function
Popularization of Small Knowledge
Product Model |
ES-2500 |
battery capacity |
Built-in LiFePo4 batteries(33140),16 series 3 parallel, the total capacity of 2304WH/720000MAH |
output power |
AC pure sine wave output, rated power 2500W over 1.1 times the rated power 6 seconds protection . |
input voltage |
220V 50Hz or 110V 60Hz( 2 versions) |
output voltage |
220V 50Hz or 110V 60Hz two versions( customizable frequency) |
The cigarette lighter output |
Output voltage 12.6V, output current 8A, total power 96W, with overcurrent protection and short circuit protection function. |
USB output |
Four USB outputs, and the two circuits share one module, with QC3.0 function, can output 5V / 3A ,9V / 2 A ,12V/1.5A ,total 18W, support a variety of mobile phones and tablets with fast charging function. |
TYPE-C output |
Two TYPE-C independent outputs, PD60W, can output 5V / 9V / 12V / 15V / 20V |
LED light |
Output power 6W |
solar charging |
Support for 36-120V wide voltage input of the solar panel, the input allows the maximum charging power of 220W, with MPPT automatic tracking technology. |
output waveform |
AC pure sine wave output, the output ripple is less than 700MV |
UPS function |
The switching time of the mains and inverter is less than 50ms, which meets the needs of most electrical equipment. |
Biphasic invert |
The motherboard comes with inverter and charging function, which can be input or output. |
charging power |
Dual-phase inverter, the charging power of the electric supply to the product is 620W, the charging reaches about 80% in 3 hours, and about 4 hours to fully fill the product. |
AC overload |
When the use load exceeds the rated power, there is no AC output, break the load, and automatically recover. |
AC Short circuit |
When the output AC short circuit, disconnect the load and automatically recover. |
lithium battery |
Built-in the power type of LiFePo4 batteries,Cycle life more than 2000 times |
low voltage alarm |
When the battery voltage is lower than 48V, the built-in buzzer alarm, lower than 46V automatic shutdown. |
weight and size |
N.W:21kg G.W: 22kg 46(L)*23.5(W)*23.7(H)cm |
color |
Light blue body black panel , grey body blue panel (Colors can be Customized .) |
PCBA function declaration
Description of the dual-phase inverter function
We refer to the dual phase inverter, refers to the product of the motherboard can output inverter and reverse battery charging. It is the use of inverter output LC circuit, input electric supply filtering circuit, and then use the inverter of four full bridge SPWM circuit in the four MOS tubes in the diode for rectification.after filtering at the same time, a high voltage DC is obtained. In the charging part, four MOS tubes are used to generate PWM waveform. and then a low voltage is obtained through the inverter transformer. After the full bridge rectification, the battery is charged. The functions are shown in the figure.
UPS function description
The product we refer to has the UPS function, which is characterized by when the electric supply input, the inverter also has the output, at this time we connect the load such as computer, when the electric supply suddenly power off, to ensure that most products will not be caused by the load shutdown phenomenon after the power failure, this function is the UPS function. The UPS function with switching time is also considered by users as EPS function, that is, backup. The outdoor portable power supply with this function can not only be used outdoors, but also can be connected to computers, TVS, routers and other devices used at home. It will not cause the situation that the equipment cannot be used after the mains power failure.
Packing instruction
Number |
Name |
Quantity |
1 |
Outdoor portable power supply host |
1 |
2 |
AC charging power line |
1 |
3 |
Instructions |
1 |
4 |
DC patch cord(Option) |
|
5 |
Solar energy input line(Option) |
|
6 |
60V 120W solar panel(Option) |
Domestic many factories are no design capability. they sell back after the PCBA from the outside. return to the factory and then to assemble. after complete test, shipment.
Our factory all PCBA is designed by myself. battery protection board in the making. we design inverter we have our own plan. charging circuit part has its own patent technology. from the design of the PCB to the completion of PCBA. and assembled finished products. with the aging process of three times.
From another factory owners to sell PCBA. from hezekiah sell BMS. and so on. all of the materials are purchased. not design capability. so the price is high. Our actual product shipment price is the cost of their factory. We can earn money is just a PCBA.
We are design company. the original factory. can be customized with different specifications. different requirements of products. custom speed. high success rate.