banner1

products

Energy Storage portable Power station

short description:

ES-2500 energy storage power supply is a high-end fashion power supply product of our company, using aluminum alloy shell, light, portable, fashionable and generous appearance, using power lithium iron phosphate battery total capacity 2304WH(3.2V/720000mAh), advanced manufacturing technology, power output energy, provide AC output, DC output two different voltage mode output, meet the user electronic product charging, and other aspects of electricity demand.This product can be used as UPS power supply and outdoor portable emergency backup power supply.


Product Detail

Product Tags

Product Description

ES-2500 energy storage power supply is a high-end fashion power supply product of our company, using aluminum alloy shell, light, portable, fashionable and generous appearance, using power lithium iron phosphate battery total capacity 2304WH(3.2V/720000mAh), advanced manufacturing technology, power output energy, provide AC output, DC output two different voltage mode output, meet the user electronic product charging, and other aspects of electricity demand.This product can be used as UPS power supply and outdoor portable emergency backup power supply.
AC: 220V (110V) AC output
DC output:PD60W*2,QC3.0*2,5V/2.1A*2,One 12V cigarette port .
With a high-brightness LED light (5W).
Display screen displays:percentage of electricity,input display: power and time,output display: power and time,Also with a UPS uninterrupted display.
There are the following two inputs: mains charging (built-in charger) and solar charging.
The output is suitable for a variety of different devices such as drones, portable ventilators, medical devices, mobile phones, tablets, laptops, desktop computers, small printers, various lamps, small fish tanks, photographic equipment, electric scooters etc.Very convenient for users to travel at home, outdoor work, camping picnic, mountaineering and exploration, etc.

DETAIL

Introduction to functions and instructions for use

Panel Description

ES-2500 (5)

● When opening the AC or DC switch,first you must turn on the power switch to be valid.(Long press for 3 seconds)
● When using DC output function, press the corresponding DC button to confirm the display DC and DC can be used(Long press for 3 seconds).The display displays the output power and use time in real time.Turn off the button when not used, to avoid power self-consumption(Long press for 3 seconds).The LCD display shows the power surplus, 0~100%.
● When using the AC output function, please press the corresponding AC button to confirm the display AC of the display screen, when the communication can be used, and the display screen displays the output power and use time in real time(Long press for 3 seconds).Turn off the button when not used, to avoid power self-consumption(Long press for 3 seconds).The LCD display shows the power surplus, 0~100%.If the power is insufficient, there will be an alarm prompt. Please charge in time for continuing to use.
● When using the LED light, please turn the corresponding button on.
● When using the UPS function, open the AC, to confirm that the output is normal, and then insert the AC power line into the AC socket. The display will display the UPS characters, indicating normal use.
● When using solar energy to charge the product, within 36V/240W. When the solar panel is connected to charging, the corresponding charging time and power will be displayed on the display screen. If the solar charging icon is not bright, check whether the solar panel is reversed or the solar panel faces the sun (stay at 30 degree angle).
● When the product is charged by the mains , the corresponding charging time and power will be displayed on the display screen during the charging process ( 2.5 hours can charge more than 80%)
● When charging using the car cigarette lighter, it is 12V / 3A. The display charging time and power will be displayed on the display.
● The output power is reduced upon overload when the machine goes into protection.Disconnect load automatically.When the output load is short circuit, the machine enters the protection and disconnects the load to recover automatically.

LCD Display Description

LCD Display Description (1)

● When the host switch is turned on,the display will light and the battery character C displays the current battery amount of power.The amount of power is shown in five grids. The D shows the current power percentage of the battery.

● After opening the DC switch on the panel, the DC / OUTPUT character in G is lit. When using the DC function, the J displays the current power used, the unit is W(Watt), the K shows the usage time, the unit is Min( minute).

● After opening the AC switch on the panel, the E AC/ PUTPUT character is lit. When using the AC function,the J shows the current power used, and the unit is W(Watt), the K shows the usage time, the unit is Min( minute).

● When using DC and AC functions at the same time, the J shows the total use power, the unit is W(Watt). The K shows the total usage time, unit is Min( minute).

● When charging the host with solar charging function, the display character A is lit. The H Displays the charging power, the I display the battery for a minute, unit is Min( minute).

● When the mains is charging the battery, the character B is lit and the character F is also lit. Indicates that the battery is charged, and the internal MCU detects whether the UPS function is normal, as the normal UPS / POWER character is lit. The H Displays the charging power, the I shows the time when the battery is fully charged, and the unit is Min( minute).

Electrical Parameters

Model

ES-2500

Battery capacity

2304WH(3.2V/720000mAh)

Output power

Rated :2500W  Peak: 2600W

Input voltage

110V/50 or 220V /60HZ ( optional)(Built-in charger, about 2.5 hours to charge more than 80%)

Output voltage

220V 50HZ or 110V 60HZ  ( optional)

DC output

12V car cigarette lighter port/7A*1 , PD60W*2,QC3.0*2, 5V/2.1A *2

LED light

5W

Solar charging port

solar charging 30-60V/ 400W

Output waveform

AC pure sine wave inversion

Lithium iron phosphate battery(LiFePO4 batteries)

Cycle life is 2000 times

Weight

N.W.: 32.5kg  ,  G.W. :  34.5kg

Size

46.9*24*31cm

Color

Gray body shell, black panel (The main shell color is optional)

Detailed Parameters

S/N

Project

Testing Standard

1

mains input voltage

220V input or 110V input

(determined according to customer national grid standards)

110V input voltage standard :between 100 and 136V;

220V input voltage standard :between 186 and 246V;

 

2

mains input fuse

220V/8A    110V/10A
3

Inverter AC output voltage

  1. No-load 220V output voltage between 220-226V ,50HZ
  2. No-load 110V output voltage between 110-116V,60HZ
4

Inverter AC output frequency

220V / 50HZ or 110V / 60HZ (Frequency Fixed)
5

Inverter AC ripple voltage

Less than 700 mV
6

Inverter AC output waveform

AC pure sine wave
7

Inverter AC rated power

  1. 220V rated 2500W, 2600W overload protection;
  2. 110V rated 2500W, 2600W overload protection;
  3. Full power test, the machine into the thermal protection in about 10 minutes.
  4. The test is discharged at 80% of the rated power, and can be completely discharged.
  5. When the overload protection test is conducted, the machine will enter the protection, and it will automatically restart after 3 seconds. If the overload is still overloaded, the machine will repeatedly restart, and after the load is disconnected, the output is normal.
  6. For the short circuit test, the short circuit test should be empty for simulation test, the output line can not be too long, as short as possible, to reduce the internal resistance of the line.After short circuit, AC is not external output, and automatically restored after disconnection.
8

Discharge efficiency standards

 

  1. Test with a rated power of 0.2 times the standard with an efficiency of 92%;
  2. Test with a rated power of 0.5 times the standard. The efficiency is 86%;

C.Test with a rated power of 0.8 times the standard, the efficiency is 76%.

9

Alarm voltage parameters

  1. When the voltage and voltage is below 19.6V, the buzzer will alarm;
  2. Automatic shutdown when the battery voltage is below 18.6V;
  3. Automatic on when the battery voltage is restored above 22.6V.
10

Solar charge Standard

  1. The circuit is designed in PWM mode.
  2. The solar input voltage is 36V.
  3. The maximum power allowed to charge the battery shall not exceed 240W.
  4. High voltage or too high power may cause damage to the internal circuit.
11 Mains charging time
  1. The charging power is 800W, 2.5 hours can charge more than 80% .
  2. 4 hours can be fully charged, and the SOC is filled with electricity to display 100%.
12

working temperature and protective temperature

When the internal heat sink temperature of the host reaches 50-55 degrees, the fan automatically activates the external heat dissipation; when the internal heat sink temperature of the host reaches 85-90 degrees, the machine is automatically turned off, and there is no external output exchange.
13

12V car cigarette lighter output parameters

  1. The no-load output voltage is 12.5-13.5V.
  2. The load output current is 7A.
  3. The current exceeds 8A will overcurrent protection, not external output.
  4. When the output is short, there is short circuit protection, after disconnecting, automatic recovery.
14

USB / 5V output parameters

  1. The USB output upper and lower ports are in parallel with two circuits, according to QC3.0 standard for testing.
  2. When testing, only one USB output port can be tested separately.
  3. The output voltage standard : 5V / 3A ,9V / 2.5A, 12V / 2A.
  4. Overcurrent and short circuit protection, recover automatically after breaking the load.
15

PD60W output parameters

  1. PD two circuits output independently, each circuit output can reach 60W.
  2. When testing, the voltage test is simulated with a decoy with the protocol.
  3. The output voltage standard : 5V / 3A, 9V/2.5A, 12V / 3 A, 15V/3A, 20V / 3 A.
  4. Different mobile phone protocols correspond to different output voltage and output current.

16

 

Average boot power consumption

  1. The average internal power consumption of the DC part is 0.5W.
  2. The average internal power consumption of the AC part is 6W.
 

 

17

LED light standard

  1. The LED light output power is 5W.
  2. Five modes output: all bright, 1/2 brightness, 1/3 brightness,  flash and SOS.
  3. Each time the switch is pressed, it will change the output mode.

18

Display Content

  1. The display of the battery power is the SOC standard, and the percentage is calculated according to the battery capacity, and the accuracy can reach an error of 5%.
  2. When charging with solar input, the solar icon on the display will light up, and the input power and charging time will be displayed at the same time.
  3. When the mains input, the icon of the mains input will light up, and the input power and charging time will be displayed at the same time.
  4. When the AC output is turned on, the AC OUT icon lights up, indicating that the inverter output is normal.
  5. When the DC output is turned on, the DC OUT icon lights up, indicating that the output is normal.
  6. When the AC or DC switch is turned on, the power switch must be turned on to be effective.
  7. Pressing for 3 seconds to turn on, and pressing for 3 seconds to turn off.
  8. When there is mains input and AC is turned on, the UPS icon lights up.
  9. When DC or AC is output to the outside, the output power displays the current power and at the same time displays how many minutes can be used

Schematic diagram of internal PCB board

DETAIL1

Function schematic diagram

DETAIL2

Packing List

S/N

Name

Quantity

1

UPS Power mainframe

1

2

AC power line

1

3

Instructions

1

4

Solar charging line

(Option)

5

 60V 400W solar pane

(Option)

Warning and Precautions

When using this product, you should always follow the following notes:
● When the product is not in use, put the product is placed in a ventilated place to avoid rain and wet. It is recommended to charge every 3 months.

● Try to charge the product in a well-ventilated place. When the product is not used, remove the power plug out the product outlet.

● It is forbidden to expose the product to the fire or higher than 80℃, which can lead to a fire explosion and other accidents.

● It is forbidden to use or place the product for a long time in high temperatures (in direct sunlight or in a very hot car), otherwise it may cause internal battery overheating, fire or function failure, and decrease in life.

● It is forbidden to disassemble the product. After the product is disassemble, it may lead to unpredictable risks such as fire, explosion or electric shock.

● It is forbidden to use of damaged wire or plug, or damaged output cable to use the product. There is a risk of electric shock.

Product Display

DETAIL3
JL-2500-3000 (1)
JL-2500-3000 (2)
JL-2500-3000 (3)
JL-2500-3000 (7)
JL-2500-3000 (6)
JL-2500-3000 (9)
JL-2500-3000 (10)
JL-2500-3000 (8)
JL-2500-3000 (12)
JL-2500-3000 (11)
JL-2500-3000 (14)
JL-2500-3000 (16)
JL-2500-3000 (15)
JL-2500-3000 (17)
JL-2500-3000 (18)

  • Previous:
  • Next:

  • Write your message here and send it to us